Baumatic BCD1025SS - Manual (Page 29)

Removing the oven door for cleaning
o
The oven door can be removed to give easier access to the oven
when cleaning.
o
Open the oven door and insert a rivet or nail (R) in the hole (F)
of the hinge (see image below).
o
Partially close the door, forcing it
upwards at the same time to free
the stop tooth and hinge sector.
o
Once the hinge is free, pull the door
forwards tilting it slightly upwards
to free the sector.
o
To reassemble, proceed in the reverse order, playing attention to
the correct position of the sectors.
Removing the inner door glass for cleaning
Ensure the cavity is cold before cleaning.
o
Simply open the oven door and remove the support securing the
glass. The glass will then slide out easily.
o
To replace the glass, follow the first step in reverse.
WARNING: This procedure can be carried out with the door
fitted on the appliance but pay attention that when the glass is
pulled upwards, the force of the hinges can close the door
roughly.
o
IMPORTANT: You should make sure that the door is supported
at all times and that you place the door on some padded
material whilst cleaning it.
29