Baumatic BO638.5SS - Manual (Page 30)

o
This appliance should be wired into a 13A (BO638.5SS) / 16A
(P650.5SS) double pole switched fused spur outlet, having 3 mm
contact separation and placed in an easily accessible position
adjacent to the appliance. The spur outlet must still be
accessible even when your oven is located in its housing.
30
terminal block cover
again (2).
nductor must always be 10 mm longer than the
line conductors.
e temperature of the mains
supply cable does not exceed 50°C.
which can be obtained from the
Baumatic Spares Department.
o
To connect the oven power
cord, loosen and remove
the cover (1) on the
terminal block, in order to
gain access to the contacts
inside. Make the
connection, securing the
cords in place with the
cable clamp provided (3)
and then immediately close
the
o
If you have to change the oven power cord, the earthing
(yellow/green) co
o
Care must be taken to ensure that th
o
If the mains supply cable is damaged, then it must be replaced
by an appropriate replacement