Baumatic BO638.5SS - Manual (Page 26)

26
ill show “P---“
and the automatic cooking symbol (8) will continue to flash until
d until the oven temperature has
fallen below the safety threshold. When the oven has cooled
ill flash when the door is locking or
nlocking, will be on statically when it is locked, and will be off
ash deposits. For best
cleaning results, you should not allow the oven to get completely
MPORTANT: Remember to turn the oven function selector knob to
mportant: Please note that you should not attempt to open the door
ntil the cleaning cycle has fully completed as outlined above.
e oven should only be cleaned with warm soapy
water, using either a sponge or soft cloth. No abrasive cleaners
recommend that an appropriate stainless steel cleaner
and polish is regularly used on the stainless steel surfaces of this
n cleaner on your appliance, then you
must check with the manufacturer of the cleaner that it is suitable
liance by a cleaning
roduct will not be fixed by Baumatic free of charge, even if the
ppliance is within the guarantee period.
o
During pyrolytic cleaning, the oven light will not switch on.
o
At the end of the pyrolytic cycle the LED display w
the selector knob is turned to the “0” (off) position.
o
The oven door will remain locke
sufficiently the door will unlock.
The door lock symbol (6) w
u
when the door is unlocked.
o
When the oven has reached a warm temperature, you should use a
soft damp cloth to wipe out the resultant
cold before wiping away the ash deposits.
I
the off position (“0”) after each use.
I
u
General cleaning information
o
Never clean any of the oven surfaces by steam cleaning.
o
Outer parts of th
should be used.
o
We would
appliance.
o
If you use any form of ove
for use on your appliance.
Any damage that is caused to the app
p
a