Basler Electric BE1-50 - Manual (Page 16)

Locator Description
E Target Indicators. These electronically latched red target indicators illuminate when the
corresponding output relay energizes. To ensure proper operation of the current-operated
targets, the current flowing through the trip circuit must be 200 mA or higher. The target
indicators are reset by operating the target reset switch (locator D).
F Output Test Pushbuttons. These pushbuttons allow manual actuation of the output relays.
Output relay actuation is achieved by inserting a nonconductive rod through the front
panel access hole.
2-2 BE1-50 Controls and Indicators 9171000990 Rev F