Balanced Audio VK-P12SE Phonostage - Manual (Page 13)

Fuse Protection
A blown fuse in the VK-P12SE is an indication of a serious problem. If a
replacement fuse fails as well, no further attempts should be undertaken.
Please contact the factory for professional service.
The proper fuse ratings are as follows:
For 100-120 VAC Units: 2A 250V Slow Blow
For 200-240 VAC Units: 1.5A 250V Slow Blow
WARNING:
Factory supplied fuses should be only replaced with the same type
and rating parts.
Servicing
The Balanced Audio Technology VK-P12SE should require no service other
than changing tubes to maintain its high performance. The vacuum tubes
used in the VK-P12SE are high quality 6922’s and 6SN7’s rated for
approximately 5000 hours of use. Please direct any further service inquiries
to the factory.
Cleaning
To remove dust, occasionally wipe the front and top surfaces of your VK-
P12SE with a damp soft cloth. If fingerprints appear, you may use a mild,
non-alkaline soap solution. Do not use abrasive cleaners, as they may
damage the fine finish of the unit.