Baja Motorsports DR49 Operator's Manual - Manual (Page 23)

20
The front brake lever has a free operating movement of 10-20mm as shown.
1. Turn the adjusting nut beneath the front hub, clockwise to increase and
counter clockwise to decrease the free operating movement.
2. You can also adjust the nut on the handlebar; clockwise to increase and
counter clockwise to decrease the free operating movement.
3. Be sure to tighten the lock nut when adjustment has been made.
ADJUSTMENT OF FRONT BRAkE
ADJUSTMENT OF REAR BRAkE
Vehicle should be properly supported before checking by kick stand.
1. The rear brake pedal has a free operating movement of 20-30mm.
2. To make adjustment, turn the rear adjusting nut clockwise to reduce and
counter clockwise to increase the free operating movement of the brake
pedal.
10-20mm
Adjusting nut
20-30mm
Rear brake pedal
Brake arm pin
Brake cable
adjusting nut
Brake arm
Pull rod