Baja Motorsports AT150SS Assembly Guide - Manual (Page 8)

8 — English © 2010 Baja, Inc. All Rights Reserved.
ASSEMBLY
INSTALLING TAIL LIGHT BRACKET
 Install tail light bracket as shown using flange bolts provided.
Tighten securely.
 Plug tail light electrical connection into socket as
shown.
INSTALLING BRUSH GUARD
 Place the brush guard in position and install the top flange
bolts. Hand tighten.
 Align the holes on the brush guard with the holes in the
brush guard support. Install the bottom flange bolts and
tighten upper and lower bolts securely.
INSTALLING MUFFLER
 Place muffler against ATV frame and align bolt holes as
shown.
 Insert flange bolt through hole in muffler and frame. Install
spacer and flat washer and tighten securely.
INSTALLING FENDER BRACES
 Install main support brace and inner and outer fender
braces as shown. Tighten securely.
 Repeat on opposite side to install remaining fender braces.
LONG
BOLT
SHORT
BOLT
SPACER
SHORT
BOLT OUTER
FENDER
BRACE
MAIN
SUPPORT
BRACE
INNER
FENDER
BRACE