BAFO BF-5320 - Manual (Page 3)

Click 'Next'.
3. Select 'Search for a suitable driver for my device (Recommended)' and click
'Next'.
4. Under 'Optional search locations' insure that 'Floppy disk drives' is
checked.
5. Insert the Driver CD into D: and click 'Next'.
6. When the wizard indicates that it found a driver for the device click 'Next'.
7. If the 'Digital Signature Not Found' dialog appears, click 'Yes' to continue
installing the driver.
8. The wizard will now copy the required files to the system and start the driver.
After starting the driver the wizard will display a completion dialog, click 'Finish' to
exit the wizard.
9. See instructions in section 2.3 to verify controller was installed correctly.
2.3.
Verifying the installation under Windows NT, 2000 and XP
Follow the instructions in this section to verify that the controller was installed correctly.
For Windows 2000/XP
1. Right click on 'My Computer' icon, select 'Properties', left click on
'Hardware' tab, and then on 'Device Manager' button.
2. Double click on 'SCSI and RAID Controllers', if there is no yellow '!' or '?' in front
of 'Silicon Image SiI 3112 SATALink Controller' the driver has started correctly.
3. To view information about the devices attached to the controller, right click the
'Silicon Image SiI 3112 SATALink Controller' and select Properties from the
context menu, then select the tab labeled 'Device Info'.
For Windows NT 4.0
1. Double click on 'My Computer' icon, select 'Control Panel', click on the 'SCSI
Adapters' icon, 'Silicon Image SiI 3112 SATALink Controller' should be
displayed correctly under 'Device' and 'Driver' tab.
2. To view information about the devices attached to the controller, double click
on the 'Silicon Image ATA Controllers' control panel applet. Select a
controller from the list at the top of the dialog. Then select a device from the
'Device Location' drop down list to view its information.