Baby Lock Sashiko 2 (BLQK2) Instruction and Reference Guide - Manual (Page 24)

G
E
T
T
I
N
G
R
E
A
D
Y
23
Ending a Stitch
A
B
C
1. When ready to end stitching stop the machine. (Fig. A)
2. Raise the needle to the up position by pressing the posi-
tioning button.
3. Raise the presser foot and pull the fabric and thread-
straight back behind the needle bar. (Fig. B)
4. Guide the thread into the thread cutter/holder and then
gently pull the thread to cut. The end of thread will
remain in the thread cutter/holder. (Fig. C)
NOTE: When the machine is stopped and the green LED
light is lit the machine will complete the cycle by taking a
stitch when the positioning button is pressed to raise the
needle.