Securing ends - overlock (cont.) – Baby Lock Ovation (BLES8) Instruction and Reference Guide User Manual
Page 75

To lock the end of the seam:
1. Take one stitch off the end of the seam. (fig. F)
2. Raise the presser foot and bring the needle(s) to the highest
position. Pull back gently on the fabric to clear the stitch fingers.
3. Carefully turn the fabric over, end to end (fig. G), and reposition
it under the presser foot with the needle at the seam edge,
aligned with the previous needle line. (fig. H)
4. Lower presser foot and sew 5-6 stitches over the previous
stitches, being careful not to cut them. You may want to turn the
cutting blade locking dial clockwise to the "LOCK" position.
Pivot the fabric and chain off. (fig. I - J)
T
E
C
H
N
I
Q
U
E
S
73
Securing Ends - Overlock (Cont.)
F
G
H
I
J