Baby Lock Ovation (BLES8) Instruction and Reference Guide - Manual (Page 16)

O
V
E
R
V
I
E
W
14
Overlock Thread Delivery System
Stitch Selector Lever
Side Cover
The Baby Lock Ovation revolutionizes the way a serger works with its exclusive overlock Thread
Delivery System. You no longer have to manually adjust the tension settings for the type of overlock
stitch you are sewing. Select the type of overlock stitch you wish to serge, the Ovation will
automatically feed the correct amount of thread through the needles, the loopers and thread guides
to form a perfect stitch every time.
The stitch selector lever, which controls the overlock thread
delivery system for overlock stitching, is located on the right side of
the machine. Select appropriate setting: A, B, C, or D.
A - for overlock stitches using the left needle (O-1) and the looper
threads balanced.
B - for overlock stitches using the right needle (O-2) and the
looper threads balanced.
C - for narrow stitches with a short length and the looper threads
balanced.
D - for stitches that require a tight lower looper.
For best results, use setting B or C for WAVE stitching.
See chart on last two pages for stitch selection settings.
Open side door on the left for easy access
to the chain looper thread tray.
Close door before sewing.
Wave/Overlock Selector Lever
The Wave/Overlock Selector lever shows "OVERLOCK" and
"WAVE". Select "OVERLOCK" for overlock stitching. Select
"WAVE" for wave stitching