Baby Lock Ovation (BLES8) Instruction and Reference Guide - Manual (Page 62)

C
O
M
B
I
N
A
T
I
O
N
S
T
I
T
C
H
E
X
P
R
E
S
S
I
V
E
60
7-Thread Reversed Wave Stitch
7-Thread Reversed Wave Stitch is a combined stitch of 3-Thread Reverse Wave and 4-Thread
triple cover stitch. This stitch looks gorgeous with decorative threads appearing on wave stitch
and triple cover stitch in the back of fabric.
For the 7-Thread Reversed Wave Stitch:
1. Use standard cutting blade cover.
2. Thread upper and lower loopers for the 3-thread reversed wave stitch. (see page 43)
3. Thread chain looper.
4. Thread C-1, C-2, C-3, and O-2 (overlock) needle positions.
5. Engage the upper blade to cut the fabric.
6. Select "B" using the Stitch Selector Lever.
7. Set the Wave/Overlock Selector lever from "OVERLOCK" to "WAVE".
The stitch selection charts in the back of the manual have other combination of stitches such as:
・
6-Thread Reversed Wave - wide (cover stitch wide with 3-thread reverse wave)
・ 6-Thread Reversed Wave - narrow(cover stitch narrow with 3-thread reverse wave)
・ 5-Thread Reversed Wave - (chain stitch with 3-thread reverse wave)
(For recommended settings, see chart on pages 88 and 89)
All these stitch combinations work in the same manner as the 7-Thread Reversed Wave Stitch.
See next page for illustrations of the various stitch combinations.
Note: Due to the change in the O-2 and upper looper telescopic antennae thread paths, always
sew the 7-thread Reversed Wave Stitch at a slow speed.
C-1
C-2
C-3
O-1
O-2
UL
∧
∨