AVocation Systems HX-0808HA/8 - Manual (Page 15)

D10
Legend:
xx = unit ID number 00 to 15
ii = input number 00 to 64
oo = output number 01 to 64
yy = value to set
Audio Routing Commands
MXxxAiioo
Route an audio input to an audio output MX00A0103
Routes audio input 1 to output 3
Response: MXxx-Audio=ii to oo
MXxxAiio1,o2,o3,o4,o5,o6,o7,o8,o9,o10
Route an audio input to as many as 10 outputs MX00A0101,02,03,04,05,06,07,08,09,10
Routes audio input 1 to outputs 1 to 10
MX00A0101,02,03,04
Routes audio input 1 to outputs 1 to 4
Response: MXxx-Audio=ii to oo (for each route made)
MXxxAAii
Routes an audio input to all outputs MX00AA02
Routes audio input 2 to all audio outputs
Response: MXxx-Audio=ii to oo (for each route made)
MXxxABooyy
Sets a balance level for an output MX00AB0249
yy=00 for full left
yy=49 for center
yy=99 full right Output 2 is set for equal balance between left and right
channels.
Response: MXxx-Balance oo set to yy
MXxxABAyy
Sets a balance level for all outputs MX00ABA49
yy=00 for full left
yy=49 for center
yy=98 full right Sets the balance of all outputs to an equal balance
between left and right channels.
Response: MXxx-Balance oo set to yy (for each output changed)