) hardware setup – Aviosys 9258HP User Manual

Page 10

Text mode
Original mode

- 10 -

4.) Hardware Setup

1.) Connect the IP Power 9258 HP to a HUB or Router using a RJ45 network cable.

2.) Connect the power adapter to the IP Power 9258 HP.

3.) Connect the HUB or Router to the internet (May through ADSL/XDSL modem).

4.) Connect the power adapters of under control electric equipment to corresponding out port of
IP Power 9258-HP.

5.) Turn on the computer and the power adapter of IP Power 9258-HP

* For 220-250V, please use power cable that can support 10A current.
Max. output current: (total of each four outlets) 10A, (each outlet) 6A.

* For 100-120V, please use power cable that can support 15A current.
Max. Output current: (total of each four outlets) 15A, (each outlet) 6A.