D-Link DI-704 - Manual (Page 20)

12
4.4.1 Static IP Address
WAN IP Address, Subnet Mask, Gateway, Primary and Secondary DNS: enter the proper
setting value provided by your ISP.
4.4.2 Dynamic IP Address
1. Host Name: optional. Required by some ISPs, for example, @Home.
2. Renew IP Forever: this feature enables the DI-704 to renew its IP address
automatically when the lease time is expired even if the system is idle.
4.4.3 PPP over Ethernet
1. PPPoE Account and Password : the account and password your ISP assigned to you. If
you don't want to change the password, keep it empty.
2. PPPoE Service Name: optional. Input the service name if your ISP requires it.
3. Maximum Idle Time: the maximum time the connection is idle before you are
disconnected from your ISP and your PPPoE session is terminated.
4.4.4 Dial-up Network
1. Dial-up Telephone, Account and Password: assigned by your ISP. If you don't want to
change the password, keep it empty.
2. Primary and Secondary DNS: automatically assigned if they are configured as
"0.0.0.0."
3. Maximum Idle Time: the time of no activity before you are automatically disconnected
from your dial-up session.
4. Baud Rate: the communication speed between the DI-704 and your MODEM or ISDN
TA.
5. Extra Setting: optional settings to optimize the communication quality between the ISP
and your MODEM or ISDN TA. Use if your ISP recommends and provides these
settings.