D-Link DI-704 - Manual (Page 16)

8
Chapter 4 Configuring The DI-704
The DI-704 provides a Web based configuration scheme, that is, configuring by Netscape
Communicator or Internet Explorer. This approach can be adopted in any MS Windows,
Macintosh or UNIX based platform.
4.1 Start-up and Log in
Activate your browser, open settings, and disable the proxy or add the IP address of the
DI-704 into the exceptions box. Then, type the DI-704’s IP address [for example (default
setting): http://192.168.123.254] in the Location (for Netscape) or Address (for IE) field and
press ENTER.
After the connection is established, you will see the web user interface of the DI-704. There
are two appearances of web user interface: for general users and for system administrator.
To log in as an administrator, enter the system password (the factory setting is ”admin”) in