Avalon Firestyles 900 PI-1992 - Manual (Page 32)

PAGE 32
CARE AND MAINTENANCE
SEE THE CARE & MAINTENANCE INSTRUCTIONS FOR DETAILS ON THESE PROCEDURES.
Weekly Maintenance:
There are several areas and parts of the unit that must be inspected and cleaned at least once a week during
operation. However, depending on fuel quality and burning habits, this maintenance may have to be performed more
frequently. These are:
A. Heat exchanger tubes.
B. Ceramic log set. (Optional)
C. Brick refractory.
D. Firepot and holder.
E. Ashpan.
F. Glass and door maintenance.
1000 Pounds (1/2 ton) of Fuel Used Maintenance:
There are several areas and parts of the unit that should be inspected and cleaned after every 1000 pounds (1/2 ton)
of fuel used. These are:
Repeat items A through F.
G. Exhaust ducts.
H. Hopper and auger tube area.
6000 Pounds (3 tons) of Fuel Used Maintenance:
The 6000 pounds (3 tons) of fuel used maintenance requires disassembly of the unit and its components. We
recommend this procedure be carried out by a trained service person or your dealer. The following areas should be
inspected, cleaned and serviced after every 6000 pounds (3 tons) of fuel used.
Repeat Items A through H.
I. Exhaust fan (including exhaust duct system).
J. Convection fan.
K. Chimney system.