Avalon Firestyles 796-1990 to 1993 - Manual (Page 31)

Page 31
INSERT OPTIONAL EQUIPMENT (Continued)
3. Blower, Front
The front blower is designed to improve your appliance's natural convection by pushing heated air
through the convection chamber and out of the vents along the top.
BLOWER ASSEMBLY
Blower Control Knob
Power
Cord
1. Carefully slide the blower assembly underneath the ashlip so that the two clips on the lower back
edge of the blower assembly slide over the front edge of the sheet metal under the appliance. You
should be able to feel the blower assembly snap into place as you slide it in. This is all the assembly
needed to attach the blower assembly.
Rear of Blower
Assembly (Side View)
Sheet Metal
Below Ashlip
Clip (One on
each side)
Avalon Stove
or Insert
FRONT OF STOVE
2. Plug in the blower and test its operation. It should blow air out of the vents on top of the appliance.
The blower is turned off by turning it all the way counter-clockwise. Each click clockwise will increase
the speed of the blower.