Installation, Facing detail – drywall facing, For qualified installers only) – Avalon Firestyles Hideaway User Manual
Page 23: Travis industries

Installation
(for qualified installers only)
2 3
Travis Industries
4030612
1 0 0 - 0 1 1 4 8
Facing Detail – Drywall Facing
NOTE The facing tucks under the
notch at the front of the fireplace
(3/8” above the base of the
fireplace).
Recommended Order of Installation We
recommend installing the facing (drywall, tile)
under the notch at the front of the fireplace
(“a”) - then install the sides and top (“b” and
“c”)
a
b
c
Top View - Drywall Facing
IMPORTANT:
The facing (or wall material)
fits behind the flange on the
stand-off.
NOTE: When installed,
there will be a gap up to
1/8" between the face and
facing.
White Tape Gasket
(attached to fireplace)
Face
Drywall, paneling, or other
facing (combustible or non-
combustible).
Fireplace
1/2"
Stand-off
1/4"
Fireplace
NOTE: The facing should tuck
behind the wall trim, thus
concealing the top of the facing
and the base of the fireplace.
Facing (drywall, paneling, or other
material - combustible or non-
combustible).
NOTE: The fireplace is shifted back
on the shelf to accommodate the
facing thickness.
Side View - Drywall Facing