Avalon Firestyles 864 See-Thru GS2 Installation - Manual (Page 72)

72 Optional Equipment
(for qualified installers only)
© Travis Industries 4141208 100-01404
12. The stepper motor (adjustable regulator) has an installation sheet included with it – make sure to
follow all of the directions. Place the stepper motor on the gas control valve (see below) – MAKE
SURE IT IS CORRECTLY ORIENTED. Secure using the screws included with the motor – tighten to
25 Lb‐inches. Leak‐test this area after installation to verify proper installation. Route the stepper
motor wire near the IFC location.