Avalon Firestyles 864 See-Thru GS2 Installation - Manual (Page 57)

Finalizing the Installation
(for qualified installers only)
57
© Travis Industries 4141208 100-01404
LP Conversion Instructions
WARNING
This conversion kit shall be installed by a qualified service agency in accordance with the manufacturer’s
instructions and all applicable codes and requirements of the authority having jurisdiction. If the
information in these instructions is not followed exactly, a fire, explosion or production of carbon
monoxide may result causing property damage, personal injury or loss of life. The qualified service
agency is responsible for the proper installation of this kit. The installation is not proper and complete until
the operation of the converted appliance is checked as specified in the manufacturer’s instructions
supplied with the kit.
Install the conversion kit prior to installing the gas line to ensure proper gas use.
1 Remove the glass (see page 42). Remove the logs and embers (if installed - page 47).
2 Remove the grate, firebacks, and center burner (see illustration below).
1/4" Nutdriver
Remove the grate from both sides.
NOTE: lift the burner to remove the grate.
Remove the log shelf
Four screws hold the center
burner in place. Slide the
burner to the right and up to
remove.