ATI Audio MX100 User Manual

Page 14

audio.com

FIELD ACCESSORIES:

PROK-1

Unit protection kit, which consists of a set of side plates
with, attached side brackets. The side plates protect

the

front panel controls and the rear XLR connectors from
impact damage and provide attachment points

for a

shoulder strap (not included); the slide brackets allow easy
quick change of remote power packs.

ABAG-1

Wraparound carry case with strap (PROK-1 above is
included), houses the MX series of mixers with slide
mounted PPA, DCA or BBU power modules. Space for
auxiliary NP-1 type batteries.

REMOTE POWER PACKS: - For use with Field Accessories

PPA-1

Integrated power pack assembly for remote operation,
which mounts to a mixer. Includes housing with
rechargeable 24VDC gel-cell battery pack (four to six hours
operation), and an external battery charger operating

at 115VAC/60 Hz.

PPA-2

Same as above except battery charger operating at
230VAC/50 Hz. Euro-plug. Contact factory for other plug
configurations.

PPA-B

Extra 24VDC rechargeable gel-cell battery pack, charger
not included.

DCA100-1

Integrated DC/DC converter, which mounts to the mixer and
accepts external battery power with DC inputs from 6 to 18
volts to produce 24VDC mixer power. Four pin XLR battery
connector.

BBU100-1

Battery Pack houses four 9V alkaline or lithium batteries
(not included) for remote operation or back-up power.

This manual is related to the following products:

MX100C MX101 XP100