ATI Audio MX100 User Manual

Page 12

audio.com

PERFORMANCE SPECIFICATIONS

All units require a 24VDC power supply, which is ordered separately.

OUTPUT LEVEL:

+22dBm MAX, +4dBm Nominal into 600 ohm
balanced or unbalanced lines. Output is selectable
+4dBm (Line) or -50dBm (Mic).

FREQUENCY RESPONSE:

+0/-.5dB 20Hz to 20kHz

MX101 only:

Switchable low cut filters -15dB @ 20 Hz, -3dB @
125 Hz

DISTORTION:

.5% THD Maximum 20Hz to 20kHz at +20dBm

NOISE:

MIC Input: EIN = -124dBm, 54dB gain; LINE
Input: EIN = -88dBm, 14dB gain 20Hz to 20kHz
measurement bandwidth.

GAIN: MX:

MIC: 52, 72 & 92dB; LINE: 32 & 42dB Gain of
each input is selectable.

XP100:

MIC: 40dB; LINE: 0dB

HEADPHONE OUTPUT:

100mW to 600/150-Ohm Headphones, TRS Jack

LIMITER:

MX101/MX100C only: 5:1 SLOPE, Attack time
50ms, Recovery time 300ms for 10dB change.

PHANTOM POWER:

+20VDC regulated @ 4ma through paralleled
3.32K Ohm resistors

POWER:

24VDC, 22 to 30 VDC max. MX100 and MX101
draw 120 mA nom., 150 mA max. XP100 draws 70
mA nom, 82 mA maximum.

DIMENSIONS in.(cm):

1.75(4.45)H X 5.6(14.22)W X 5.75(14.6)D; 1.25
lbs.57Kg

MOUNTING:

Free standing or rack mountable; one, two or three
units in 1-3/4”

CONNECTORS:

Standard 3 pin XLR female inputs and XLR male
output. Pin 1 ground

CUE (Director Input):

MX101 only: Unbalanced -10dBu, 2.5 mm TS jack.

This manual is related to the following products: