Artesyn RTM-ATCA-F140 Installation and Use (May 2014) - Manual (Page 20)

Hardware Preparation and Installation
RTM-ATCA-F140 Installation and Use (6806800M97E) 20
2. Check for damage and report any damage or differences to the customer service.
3. Remove the desiccant bag shipped together with the blade and dispose of it according to
your country’s legislation.
2.3 Environmental and Power Requirements
In order to meet the environmental requirements, the blade has to be tested in the system in
which it is to be installed.
Before you power up the blade, calculate the power needed according to your combination of
blade upgrades and accessories.
2.3.1 Environmental Requirements
The environmental conditions must be tested and proven in the shelf configuration used. The
conditions refer to the surrounding of the blade within the user environment.
 The RTM is thoroughly inspected before shipment. If damage has occurred or items
missing during transportation, contact our customer's service immediately.
 Remove the desiccant bag shipped together with the blade and dispose of it according to
your country’s legislation.
 The environmental requirements of the blade may be further limited down due to
installed accessories, such as hard disks or PMC modules, with more restrictive
environmental requirements.
 Operating temperatures refer to the temperature of the air circulating around the blade
and not to the actual component temperature.