beautypg.com

Daewoo DWP-28W2D User Manual

Page 17

background image

16

Choose starting point

Select the "Program" function and then
the programme which you want to start
manual tuning. Then, the channel number,
the frequency, If you don’t know the frequency
or channel number then refer to channel
searching section. The name and the programme
number of this programme are displayed in
the install menu.

1

TV system Selection

If necessary, you can change the TV system :
- Select "system" function.
- Choose between :

FRANCE (L/L’), GB (I),
EURO (B/G), E / EURO (D/K) system.
Then, the programme displayed on
screen is changed to the system chosen.
This procedure can be applied to any individual
programme selected.

2

Channel searching

- Select "Freq." function.
- Press the remote control

CURSOR RIGHT / LEFT buttons for more than
3 seconds to start (up / down) manual tuning.

- After searching, tuning will stop automatically

to the next channel.

(To stop searching press the remote control

MENU button)

Note: If you know the channel number or the

frequency of the channel you want to
search, you can set these channels,
entering the data directly into "channel"

or "Freq." setting option.

3

MANUAL

CHANNEL

TUNING

Fine Tuning

- If you are unable to get a good picture or

sound because of poor reception, it is possible
to fine tune a signal.

- Select channel frequency ("Freq.") function.
- Press and release the remote control

CURSOR RIGHT/LEFT
buttons to fine tune a signal.

4

Enter station name

- Select "name" function.
- Use the CURSOR RIGHT/LEFT

buttons to select the character (letter)
you want to insert.

- To modify this letter press the

CURSOR UP/DOWN buttons until the
desired letter is displayed and press
OK button to confirm.

5

To store a programme in memory
- Select "store to" function
- Adjust the programme number you want to

store and confirm by pressing the remote control
"OK" button. (Program number will breifly turn red!)

Remarks: this function can be used also if you

want to copy a programme already
memorised to another programme number.

Store programmes in memory

6

This manual is related to the following products: