Daewoo DWP-28W2D - Manual (Page 10)

9
DAILY USE
Direct selection
PICTURE CONTROL
ASPECT MENU
You can choose between three picture settings,
using repeatedly the remote control NORMAL button :
- Normal I (standard hard picture)
- Normal II (standard soft picture)
- Favourite (you can adjust picture setting to your own
Preference, using the Picture menu)
For other adjustments : Brightness, contrast, colour,
sharpness, see Picture menu. (page )
The sleep function will switch
the television to stand-by
after a set period of time.
Pressing the remote control SLEEP
button repeatedely, you can enter
one of the following settings :
OFF >30 min > 60 min >
90 min >120 min >OFF
PROGRAMME SELECTION
SLEEP
FUNCTION
SOUND CONTROL
11
1
Mono forcing
If you are unable to get good sound on a channel due to a poor stereo broadcasting signal,
you can change from stereo to mono transmission by pressing the remote control MODE button.
Then the programme status concerning this programme indicates "Mono" (in red colour)
For other adjustments (bass, treble, balance and sound effect) see sound menu page . 12
3
Use remote control NUMBER buttons.
For two digit programme numbers,
press the button for the second digit
within 2.5 seconds.
Up/Down moves
2
Use PR UP/DOWN buttons on the
remote control unit or on the front of the set.
PR
PR
MENU
Whenever the "ZOOM" button is pressed, the screen will be changed as shown;
Auto->16:9->Zoom->Panorama->Auto...