Dimplex NBDF2608 - Manual (Page 5)

5
SAVE THESE INSTRUCTIONS
⑯
Do not insert or allow foreign
objects to enter any ventilation or
exhaust opening as this may cause
an electric shock or fire, or damage to
the heater.
⑰
Although this unit is of zero
clearance design, to prevent a
possible fire, do not block air intake
or exhaust in any manner. Do not use
on soft surfaces, like a bed, where
openings may become blocked.
⑱
All electrical heaters have hot and
arcing or sparking parts inside. Do not
use in areas where gasoline, paint, or
flammable liquids are used or stored
or where the unit will be exposed to
flammable vapors.
⑲
Do not modify the electric
fireplace. use it only as described
in this manual. Any other use not
recommended by the manufacturer
may cause fire, electric shock or
injury to persons.
⑳
Avoid the use of an extension
cord. Extension cords may overheat
and cause a risk of fire. If you must
use an extension cord, the cord shall
be no. 14 AWG minimum size and
rated not less then 1875 Watts.
㉑
Do not burn wood or other
materials in the electric fireplace.
㉒
Do not strike the fireplace glass.
㉓
Always use a certified electrician
should new circuits or outlets be
required
㉔
Always use properly grounded,
fused and polarized outlets.
㉕
Disconnect all power supply
before performing any cleaning,
maintenance or relocation of the unit.
㉖
When transporting or storing the
unit and cord, keep in a dry place,
free from excessive vibration and
store so as to avoid damage.
IMPORTANT INSTRUCTIONS