ART Pro Audio SPLITComPro - Mic Splitter/Combiner - Manual (Page 9)

SPECIFICATIONS:
Frequency Response : 20Hz to 150kHz
+/- 0.2 @ 0dBu
THD: Less than 0.0007%
from 20Hz to 20kHz
at 0dBu input
Phase Shift: Less than 10
°
at 20 to 150kHz
(reference 1kHz)
Typical Driving Source Dist.: 150 Ohms
Typical Output load Impedance: 1k Ohms
Dimensions HxWxD(in):
1.85 x 4.6 x 3.5
Dimensions HxWxD(mm): 47 x 117 x 89
Weight (lbs/kg): .75 / .32
Note: All of the measurements made from the ISOLATED MIC
OUTPUT with PHASE switch out (NORM) and a 150 Ohm
balanced source feeding the MAIN MIC INPUT and a 1k Ohm
load connected to the ISOLATED MIC OUTPUT to simulate a
typical "real world" microphone and mic preamplifier. 0dBu =
0.775VRMS