ART Pro Audio SPLITComPro - Mic Splitter/Combiner - Manual (Page 6)

APPLICATIONS:
AS A SPLITTER: The SPLITComPro provides one
direct-coupled output and one isolated output from a
single microphone. Applications include sending the
direct output to the main or FOH mixer, and the second
isolated output to a monitor or recording mixer. The
MAIN MIC OUTPUT passes phantom power from the
main mixer to the MAIN MIC INPUT for use with
condenser microphones. Phantom power is blocked
from passing to the ISOLATED MIC OUTPUT.
AS A COMBINER: The SPLITComPro provides one
output from two microphone inputs. The PHASE switch
can be used to invert the relative phase of the
ISOLATED MIC INPUT. Applications include dual
miking of percussion instruments, choirs, and instrument
amplifiers. Phantom power passes through each output
to their respective input, (MAIN to MAIN, ISOLATED to
ISOLATED), however phantom power is blocked from
passing between the MAIN and ISOLATED signal paths.
Only the audio passes between the MAIN and
ISOLATED signal paths (it is present on all inputs and
outputs).
The SPLITComPro includes a GROUND switch that, in
the LIFT position, will provide full ground isolation
between the MAIN MIC INPUT (& OUTPUT) and the
ISOLATED MIC INPUT (& OUTPUT) to reduce noise