ART Pro Audio SLA2 - 200W Power Amplifier - Manual (Page 3)

3
SAFETY PRECAUTIONS
Warning: For optimum performance and reliability, do not operate the
amplifier with a speaker load of less than 4 Ohms per channel, or any
combination of speakers that together are less than 4 Ohms.
Using one speaker per channel, it must be rated at 4 or more Ohms.
Using two speakers per channel, they must each be rated at 8 Ohms,
or greater. When in bridge mode, the speaker should be rated at 8
Ohms, or greater.
Fill in the following information for your reference:
Date of purchase ___________________
Purchased from
___________________
SERIAL NUMBER ___________________