beautypg.com

Connections, Input, Thru – ART Pro Audio CoolSwitchPro - Isolated A/B-Y Switch User Manual

Page 5: Output a, Output b

background image

5

CONNECTIONS

All connections are made through 1/4-inch TS (mono) jacks
whose function is labeled on the top of the unit. Use shielded
cables with 1/4-inch TS (two conductor) plugs to connect to
these jacks.

INPUT

Plug your instrument (guitar, bass, or keyboard) or other signal
source into this jack.

THRU

This jack provides a direct hard-wired connection to the input
jack which is not affected by any switch function. Use it to
connect to an electronic tuner or to provide an extension to
your input cable.

OUTPUT A

Use this jack to connect to your main amplifier or channel.

OUTPUT B

Use this jack to connect to your secondary amplifier or channel.
The functions controlled by the rocker switches on the front
panel are applied to this output.