beautypg.com

Configuring your wireless connection, Accessing the configuration interface, Configuring – ARRIS DG860 User Guide User Manual

Page 21: Your wireless connection, Configuring your wireless connection

background image

Configuring Your Wireless Connection

The DG860 ships with wireless LAN security set by default. See the security label

on your product (shown on image at the left) for the factory security settings: net-

work name (SSID), encryption method, network key, and WPS PIN.

Note:

You must set up your computer and other client devices to work

with the security settings on the DG860. Refer to the documen-

tation for your client device for instructions on setting security.

On most computer systems you only need to select the network

name (SSID) device and enter the encryption key. If your com-

puter or client device supports WiFi Alliance WPS (Wireless Pro-

tected Setup), activate WPS on your computer or client device

and the DG860 simultaneously to easily set up your system se-

curity.

If you need to modify the Data Gateway’s default wireless security settings, or if you

want to configure any other wireless LAN settings, refer to the following instruc-

tions.

Accessing the Configuration Interface

Follow these steps to access the configuration interface. You should have already set

up the DG860 as described in

Installing and Connecting Your Data Gateway

.

1 a) If security has been properly set up on your computer to access the wire-

less LAN on the DG860, use the connection utility for your operating system

to connect to the wireless LAN using its network name (SSID), as shown on

the security label.
b) If you cannot access the wireless LAN, you must first establish a wired

Ethernet connection between your computer and the DG860.

2 In your web browser, open the page http://192.168.0.1/ to access the

wireless router setup.
The Login screen displays.
Note: The default user name is “admin”. The default password is “pass-

word”, in lower case letters.

3 Enter the user name and password and click the Apply button to log in.

The System Basic Setup screen displays.

Touchstone DG860 Data Gateway User’s Guide

Safety

Getting

Started

Installation

Ethernet

Configuration

Usage

Troubleshooting

Glossary

21

Reset

Ethernet

10/100/1000

Cable

2

1

4

3

Security

Label