Argox Bartender UL Form-making - Manual (Page 3)

Argox Bartender 10.0 UL Form-making User Guide
3
1 What is the Form-making label file?
The Form-making data format starts with the FS command, followed by a string
inside closed quotation marks “ ” for the form name and ends with the FE
command. Anything between FS and FE is the label content. An example of a
complete Form-making label file (i.e. the Form name is “EXPORT”) is provided
below:
ZN
FK"EXPORT"
FS"EXPORT"
I8,1,001
q1215
O
JF
ZT
Q900,37
KI81
N
FE
2 The Purpose of the Form-making label file
The label file can be stored in ArgoKee or the printer. The input data devices for
different storage devices are as follows:
2.1 ArgoKee
The device shown in the illustration below can be used for data input.
2.2 Printer
A PS/2 keyboard or scanner must be used as the data input device. A PC can also
be used to send commands directly to the printer for printing Form-making label
files.
3 Supported Versions
BarTender 9.30 2731 or later versions
Seagull Driver 7.2_M-1 or later versions