Aplex Technology ACS-2695A - Manual (Page 38)

ACS-2695 User Manual 38
to
PS/2 keyboard and mouse via a dedicated cable for direct used.
Pin25~40: USB0/USB1/USB2/USB3, Front USB connector, it provides 4 USB ports
via
a dedicated USB cable, speed up to 480Mb/s.
Note:
When connecting LEDs and buzzer and GPIO and USB, pay special attention to the
signal polarity. Make sure that the connector pins have a one-to-one correspondence
with chassis wiring, or it may cause boot up failure.
41. SATA_P1/SATA_P3:
(2.5mm Pitch 1x2 box Pin Header), Two onboard 5V output connectors are reserved to
provide power for SATA devices.
Pin# Signal
Name
1 +DC5V
2 Ground
Note:
Output current of the connector must not be above 1A.
42. SATA_P2/SATA_P4:
(2.5mm Pitch 1x4 box Pin Header), Two onboard 5V and 12V output connectors are
reserved to provide power for SATA devices.
SATA_P2 (2Pin or 4Pin)
Pin# Signal Name
1 +DC5V
2 Ground
3 Ground
(NC)
4 +DC12V
(NC)
SATA_P4 (option)
Pin# Signal Name