Aplex Technology ACS-2695A - Manual (Page 33)

ACS-2695 User Manual 33
DCD 1 2 RXD
TXD 3 4 DTR
Ground 5 6 DSR
RTS 7 8 CTS
JP3select
Setting
(RI/5V/12V)
9 10 NC
28. USB_LAN1/USB_LAN2
:
USB4/USB5/ USB12/USB13 ：(Double stack USB type A), Rear USB connector, it
provides up to 4 USB2.0 ports, speed up to 480Mb/s.
Each USB Type A Receptacle (2 Ports) Current limited value is 1.5A.
If the external USB device current exceeds 1.5A, please separate connectors
into different Receptacle.
LAN1/LAN2: (RJ45 Connector ), Rear LAN port, Two standard 10/100/1000M RJ-45
Ethernet ports are provided. Used Intel 82574L chipset, LINK LED (green) and
ACTIVE LED (yellow) respectively located at the left-hand and right-hand side of the
Ethernet port indicate the activity and transmission state of LAN.
29. JACK1
:
(Diameter 3.5mm Double stack Jack), HD Audio port, An onboard Realtek ALC662
codec is used to provide high quality audio I/O ports. Line Out can be connected to a
headphone or amplifier, MIC is the port for microphone input audio.