Apantac MicroQ - Manual (Page 5)

US-3x00
5
1.0 WHAT’S IN THE BOX
1 x MicroQ
1 x Mounting Plate
1 x RJ50 to DB9 cable for GPI/Tally
1 x DC 5V 3.2A Power Adapter
1 x Manual
Important Note:
Default IP address: 192.168.1.151
The configuration PC must be on the same subnet as the MicroQ, for example,
“192.168.1.1”
The default output resolution is set to [email protected] Hz for 60Hz countries and
1024x768@60Hz for 50Hz countries to accommodate the most common display
resolution
2.0 Key Features
– Low power consumption - 12 W and Silent – No fan!
– Fixed Quad Split, each window can go full screen
– Accepts 4 x auto-detect 3G SDI, HD SDI, SD SDI and Composite video signals
– Simultaneous HDMI and SDI outputs
– Decode/display up to 8 embedded audio per SDI input
– Ethernet port for Configuration, Dynamic Labels & Tallies interface (TSL)
– One 32 characters labels per Window
– Up to 32 characters
– Text and Background Colors, Transparency are adjustable
– Borders, can be turned ON or OFF
– Visual Alarms (Tags)
– 0 to 8 Embedded Audio Meters can be displayed for each Window
– Audio monitoring output – analog, HDMI
– Four Front Panel Buttons capabilities configurable for:
– Safe Area Markers
– Up to 4 tally levels control with TSL, 2 with GPI
– Support of the TSL protocol v. 3.1 over IP is standard
– 8 x GPI contacts: Configurable for tally or ASCII protocol
– Automatic aspect ratio