Denso OFFICE PRO 36 - Manual (Page 14)

11
TECHNICAL SPECIFICATIONS
ITEM/FEATURES OFFICE PRO 36
Rating Conditions
dry bulb
95º F (35º C)
wet bulb 83º F (28.2º C)
humidity 60%
Specifi cations
power frequency
60Hz
line voltage single phase 208/230V
power consumption 4.4 Kw
current consumption 19.7 Amps
power factor 99%
starting current 88A
power wiring 10 (3-core) AWG
Cooling Unit
cooling capability
9,070 Kcal/hr
36,000 BTU/hr
cooling system direct expansion
Blower
type of fan
centrifugal fan
air volume: evaporator (high speed) 999 ft 3 /min (1682 m 3 /h)
evaporator (low speed) 825 ft 3 /min (1402 m 3 /h)
condenser (high speed) 1490 ft 3 /min (2532 m 3 /h)
evaporator (low speed) 1060 ft 3 /min (1801 m 3 /h)
motor output: evaporator (high) 0.21 Kw
condenser (high) 0.33 Kw
Compressor
type
hermetic scroll
output 2.1 Kw
refrigerant type R-22
refrigerant capacity 2.4 lbs (3.1 kg)
Safety Devices
compressor overload protector
included
fan motor protector included
anti-freezing thermistor included
full drain tank switch included
automatic restart (power interruption) included
compressor time delay program included
Dimensions & Weight
W x D x H (in)
30” x 44” x 52”
W x D x H (mm) 760 x 1117.6 x 1321
weight (lbs/kg) 540/245
Operating Conditions
inlet air (relative humidity)
95º F (35º C), ≤ 60%
65º F (18.3º C), ≥ 50%
Control Device
temperature control
included
programmable timer included
two speed fan included
ITEM/FEATURES OFFICE PRO 36
dry bulb 95º F (35º C)
wet bulb 83º F (28.2º C)
humidity 60%
power frequency 60Hz
line voltage single phase 208/230V
power consumption 4.4 Kw
current consumption 19.7 Amps
power factor 99%
starting current 88A
power wiring 10 (3-core) AWG
cooling capability 9,070 Kcal/hr
36,000 BTU/hr
cooling system direct expansion
type of fan centrifugal fan
air volume: evaporator (high speed) 999 ft
evaporator (low speed) 825 ft
condenser (high speed) 1490 ft
evaporator (low speed) 1060 ft
motor output: evaporator (high) 0.21 Kw
condenser (high) 0.33 Kw
type hermetic scroll
output 2.1 Kw
refrigerant type R-22
refrigerant capacity 2.4 lbs (3.1 kg)
compressor overload protector included
fan motor protector included
anti-freezing thermistor included
full drain tank switch included
included
compressor time delay program included
W x D x H (in) 30” x 44” x 52”
W x D x H (mm) 760 x 1117.6 x 1321
weight (lbs/kg) 540/245
inlet air (relative humidity) 95º F (35º C),
65º F (18.3º C),
temperature control included
programmable timer included
two speed fan included