AMETEK FPDC - Manual

Technical Note
ReFlex Power™ Mating Connectors for FPDC Module
Document No. W380274-01 Rev E • 1/23/2009
©2008 AMETEK Programmable Power, Inc. • All rights reserved. • AMETEK is a trademark of AMETEK, Inc.
9250 Brown Deer Road, San Diego CA 92121 • Tel: 858-450-0085 • Fax: 858-458-0267 • email: [email protected] • Web: www.programmablepower.com
1 of 4
PURPOSE
Provide mating connector information for the ReFlex Power™ Fixed Power DC (FPDC) module.
Figure 1. FPDC Front Panel View
MATING CONNECTOR KIT
FPDC Mating Connector Kit - AMETEK Part No. 5380274-01, mates with RFP-F1000-001-XXXX, and includes the following for
both Interface and DC output connectors:
Bill of Material
Item
AMETEK
Part No.
Description Qty
Manufacturer Part
No.
Manufacturer Suggested Source(s)
1 856-214-04
Conn, 21P, DSUB, 8/20AWG,
Male
1 CBC21WA4M1000Z Positronic Industries
Positronic Ind.
http://www.connectpositronic.com/default.cfm
2 856-745-52 Contact, 12AWG, 30A, Male 4 MC4012D Positronic Industries
Positronic Ind.
http://www.connectpositronic.com/default.cfm
3 856-247-39 Conn, Backshell, 37P, Strt, 2 PC 1 D37000Z00 Positronic Industries
Positronic Ind.
http://www.connectpositronic.com/default.cfm
4 856-214-09
Conn, 9P, DSUB, 20-24AWG,
Crimp, Male
1 SD9M1000Z Positronic Industries
Positronic Ind.
http://www.connectpositronic.com/default.cfm
5 856-247-10
Conn, Backshell, 9P, DSUB, 2
PC
1 D9000Z00 Positronic Industries
Positronic Ind.
http://www.connectpositronic.com/default.cfm
RECOMMENDED TOOLS (NOT INCLUDED WITH MATING CONNECTOR KIT)
Hand crimp: Positronic Industries P/N 9507-0-0-0
Pneumatic crimp: Positronic Industries P/N 9550-1-0
Insertion/extraction: Positronic Industries P/N M81969/1-02
Pins A1 – A3 insertion/extraction: Positronic Industries P/N 4711-2-0-0
Pin A4 extraction: Positronic Industries P/N 4311-0-0-0