AMETEK LPDC-65V - Manual

Technical Note
ReFlex Power™ Mating Connectors for LPDC-65V Module
Document No. W380270-02 Rev E • 1/23/2009
©2008 AMETEK Programmable Power, Inc. • All rights reserved. • AMETEK is a trademark of AMETEK, Inc.
9250 Brown Deer Road, San Diego CA 92121 • Tel: 858-450-0085 • Fax: 858-458-0267 • email: [email protected] • Web: www.programmablepower.com
1 of 4
PURPOSE
Provide mating connector information for the ReFlex Power™ Low Power DC, 65V (LPDC-65V) module.
Figure 1. LPDC-65 Front Panel View
MATING CONNECTOR KIT
LPDC-65V Mating Connector Kit - AMETEK Part No. 5380270-02, mates with RFP-D1065-5A1-XXXX, and includes the
following for both Interface and DC output connectors:
Bill of Material
Item
AMETEK
Part No.
Description Qty
Manufacturer
Part No.
Manufacturer Suggested Source(s)
1 856-214-07
Conn, 13P, DSUB,
8/20AWG, Male
1 CBD13W6M2000Z Positronic Industries
Positronic Ind.
http://www.connectpositronic.com/default.cfm
2 856-745-53
Contact, F-Volt,
3600VRMS, 500C, Male
6 MS4820D-50 Positronic Industries
Positronic Ind.
http://www.connectpositronic.com/default.cfm
3 856-247-39
Conn, Backshell, 37P, Strt,
2 PC
1 D37000Z00 Positronic Industries
Positronic Ind.
http://www.connectpositronic.com/default.cfm
4 856-214-09
Conn, 9P, DSUB, 20-
24AWG, Crimp, Male
1 SD9M1000Z Positronic Industries
Positronic Ind.
http://www.connectpositronic.com/default.cfm
5 856-247-10
Conn, Backshell, 9P,
DSUB, 2 PC
1 D9000Z00 Positronic Industries
Positronic Ind.
http://www.connectpositronic.com/default.cfm
RECOMMENDED TOOLS (NOT INCLUDED WITH MATING CONNECTOR KIT)
Hand crimp: Positronic Industries P/N 9507-0-0-0
Pneumatic crimp: Positronic Industries P/N 9550-1-0
Insertion/extraction: Positronic Industries P/N M81969/1-02
Pins A1 through A6 insertion/extraction: Positronic Industries P/N 4311-0-0-0