D-Link DSL 2740B - Manual (Page 7)

7
Configuring the Router via the
D-Link Click’n Connect Utility
The Click’n Connect utility will guide you through the installation process step-
by-step. Follow the on-screen instructions, then proceed to the next step.
Step 4 – Detecting Internet Connection Type
The Click’n Connect utility will now check the DSL-2740B to make sure it has
been connected correctly. Once it has successfully detected your modem, it will
try to detect your Internet connection type.
At this point, you may want to prepare your ADSL account information that is
provided to you by your Internet Service Provider (ISP) as you will require it
shortly.
Follow the
on-screen
instructions,
then Click
Next to
continue