D-Link DPH-150S - Manual (Page 24)

23
Hardware Version Hardware version of the IP phone
Firmware Version The current firmware version installed on the DPH-150S
DSP Version The current version of the DSP application installed on the DPH-150S
MAC Address MAC address of the IP phone
NAT Mode The NAT mode (Router or Bridge) of the LAN interface
6.3. System – Management
User Name Configuration menu login name
Current Password
Configuration menu login password
New Password Enter a new password to replace the current one
Confirm Password Enter the new password again to confirm the change
Get Time From Get time setting from SIP or NTP server
NTP Server IP Network Time Protocol (NTP) is a protocol used to help match your system
clock with an accurate time source (ex. atomic clock, time server). It is good
practice to have all your networked computers synchronized with one server.