AMETEK DLM600 Series - Manual (Page 8)

Sorensen DLM600 Series M6 Option: M9G, M130, M131
Addendum 5
2.1.5 Configuration Switch
The DIP switch is accessible from the rear panel to allow configuration of the supply with
the installed M130/M131 for the user’s particular system and application.
Note: On the Ethernet master, the rear panel switch gets set to Remote On, and all remaining
switches are disregarded.
Note: Two types of DIP switches are utilized; toggle and rocker. For toggle switches, the
shading indicates the position of the toggle switch. For rocker switches, the shading
indicates the depressed side.
Figure 2.1-5 DLM 600W Configuration Switch
Figure 2.1-6 DLM 600W Series w/M6 Option Configuration Switch
Configuration
Description
ON Remote operation selected. *
OFF