AMETEK DLM600 Series - Manual (Page 5)

2 Addendum
1.3 PROGRAMMABLE FUNCTIONS
M9G - All programmable functions remain as described in Section 1 of the M9 manual.
M130/M131 - Ethernet M130 and M131 programmable functions listed in manual,
P/N M362797-03 apply.
1.3.1 Additional Programmable Functions
- Remote Isolation Relay control
- Remote Local/Remote Sense Relay control
- Remote Reverse Polarity control
2.1 CONFIGURATION
2.1.1 Setup Procedure, M9G
The M9 and the Relay PCB options are installed at the factory. Use the setup procedure
described in the M9 programming manual section 2 to configure the M9 and the Relay
PCB for your system and application.
2.1.2 Setup Procedure, M130 and M131
The M6 is installed in the supply at the factory. The M6 card is not a user serviceable
assembly.