AMETEK DLM600 Series - Manual (Page 7)

4 Addendum
2.1.4 Rear Panel M130/M131 with M6 Option,
Figure 2.1-3 and Figure 2.1-4 label the pertinent rear panel components for the M130 and
M131 with M6 option.
Figure 2.1-3 M130 Rear Panel with M6 Disconnect/Polarity Relay Option
1 – Configuration Switch.
2 – External User Control Signal Connector
3 – (Not in M131) RESET switch and green dual-purpose NET LED.
 RESET switch: returns configuration parameters to factory default (must be
depressed until NET LED blinks at least twice).
 NET LED: when solid-lit, indicates Network Connectivity; blinking indicates
Instrument ID. If the LED is off, there is no Ethernet connection found by the
power supply.
4 – Connections for Ethernet (RJ-45) with built-in 10/100 indicator (on right top of the
RJ45 connector) and an Activity indicator (on the left top). Also RJ-11 connectors
for RS232 and RS485. (No RJ-45 connector on M131).
Figure 2.1-4 M131 Rear Panel with M6 Disconnect/Polarity Relay Option