American Time Wireless Digital Message Board User Manual
Page 9
9
© American Time
Control Command Instruction and Examples
17. Clear Count Times
GALEDRESCM-030
Description: The receiving message will show 30 times then clear itself.
18: Clear by "Reset" Command
GALEDRESCM-ON
Description: The Clear by "Reset" command is enabled. You can now clear messages as follows:
Example 1: Message content is "this is a test"
reset this is a test
This head reset command will clear the message.
Example 2: Message content is "this is a test"
this is a test RESET
This trailer reset command will clear the message.
19: Time Stamp Mode
GALEDTMSM=1
Description: The receiving message will add a time stamp to the head of the message
Example: Message content is " this is a test", Time is 17:58
The message will display as
17:58 this is a test
20: Non Scroll Hold Time
GALEDMGTM=005
Description: The non scroll message will show and hold 5 seconds. Also refer to Command Item 13 (Scroll
Speed Control).
21: Delet All Messages
GALEDDELALL
Description: All messages will be deleted and the default message will display. Also refer to Command Item 14
(Default Message).
22: LED Sign Type
GALEDTYPE=2
Description: The Message Board will change to two line display mode.
23: Message Display Sequence
GALEDSEQU=1
Description: The Message Board will display message in FIFO (first in first out) mode.
24: Appear Message Mode
GALEDAPPM=8
Description: The Message Board will display an animation before the message
25: Disappear Message Mode
GALEDDISM=B
Description: The Message Board will display an animation after the message