American Time Wireless Digital Message Board - Manual (Page 6)

© American Time 6
Item Features Command Parameters Description
1 Timer display On/Off GALEDTM= ON or OFF ON=Timer display enable; OFF=Timer display disable
2 Timer Date On/Off GALEDDT= ON or OFF Date display ON or OFF
3 Timer Date Setting GALEDDATE= YYMMDD YY=year from 0 to 99; MM=month from 1 to 12; DD=day
from 1 to 31
4 Timer Date Mode GALEDDTMD= X 0=DD-MMM-YY; 1=MMMM DD,YY; 2=MM/DD/YY; 3=DD/
MM/YY; 4=MM-DD-YY; 5=DD-MM-YY;
6-MM.DD.YY; 7=DD.MM.YY; 8=MM DD YY;
9=DD MM YY
5 Timer Time Setting GALEDTIME= HHmmSS HH=hour from 00 to 23; mm=minute from 00 to 59;
SS=second from 00 to 59
6 Timer Month Language
of Date GALEDLANG= XXX ENG=English; FRA=France
7 Timer Display Mode GALEDTMD= X This control command will not work on LED Sign Type=A or
B mode.
1=Timer display after every message.
2=Timer display once after finished all messages.
8 Timer Hour Type GALEDTMHR= 12 or 24 24=24 hours type (default); 12=12 hours type with AM, PM
indicator
9 Timer Display Hold Time GALEDSHTM= XXX From 001 to 999 seconds
10 Buzzer On/Off GALEDBZ= ON or OFF ON=Buzzer beep enable; OFF=Buzzer beep disable
11 Buzzer On Time GALEDBZTM= XXX From 001 to 999 seconds
12 Buzzer Music Type GALEDBZTY= X Music type from 0 to 9
13 Scroll Speed Control GALEDSPEED= X X=1 (slowest) to 5 (fastest); This scroll feature only active
if the message is more than display's character length. It
will be setting to default value when the LED Sign Type
command is changed.
14 Default Message GALEDMESG= xxxxx… It keeps 50 characters for message to replace default
message of "Gold Apollo LED signs moving display". If use
"GALEDTIME=HHmmSS" as the default message then the
default message will show time information on the display.
15 Message Counter GALEDMGCT= XX 01=only use one message slot for any cap code and
function bits; 24=each cap code and function will locate its
message slot; AU=Auto can have 24 memory but does not
care about cap codes. This 24 memory will do FIFO action,
meaning if it's memory is full then oldest memory will move
out of memory.
16 Auto Clear Delay Time GALEDCLRDY= XXX 000=auto clear disable, delay time=001 to 999 seconds,
message will auto clear itself after delay time is time out.
17 Auto Clear Count Times GALEDCLRCT= XXX 000=auto clear disable, display how many times=001 to 999
times, message will auto clear itself after display times is
time out.
18 Clear by "Reset"
Command GALEDRESCM= ON OR OFF ON=if the message has the header or trailer word "reset",
then the message will be cleared. The header format is reset
+ message, the trailer format is message + reset. The word
reset can be lower or upper case letters.
19 Time Stamp Mode GALEDTMSM= X 0=Off; 1=time stamp in the head of message; 2=time stamp
at the end of message. Time stamp format is HH:MM (24
hour time format)
20 Non Scroll Hold Time GALEDMGTM= XXX From 001 to 999 seconds, this feature is only active when
the message length is less than message board's character
length. The default time is 3 seconds.
21 Delete All Messages GALEDDELALL This command will clear all messages, then it will show the
default message on the display.
Message Board Control Commands V2.00 (use for firmware V6.0 up)