American Time Wireless Digital Message Board - Manual (Page 7)

7 © American Time
Item Features Command Parameters Description
22 LED Sign Type GALEDTYPE= X 1=1 line
2=2 lines
A=2 lines with timer on second line
B=2 lines with timer on first line
a=2 lines with default message is on second line
b=2 lines with default message on first line
23 Message Display
Sequence GALEDSEQU= X 0=FIFO (1st in 1st out); 1=LIFO (last in 1st out)
24 Appear Message Mode GALEDAPPM= X This feature only works for LED Sign Type=1 or 2
0=Fly to Left (default); 1=Enter to Right
2=Extended to Bottom; 3=Fly from Top
4=Fly from Bottom; 5=Raining; 6=Snow Flakes
7=Appear right away; 8=Animation 1
25 Disappear Message
Mode GALEDDISM= X This feature only works for LED Sign Type=1 or 2
0=Continue (default); 1=Run to Left; 2=Curtain Right;
3=Curtain Down; 4=Fly Away; 5=Sink; 6=Flash & Invert;
7=Vapor; 8=Dissolve; 9=Flash; A=Disappear right away;
B=Animation 1
Message Board Control Commands V2.00 (use for firmware V6.0 up)
Control Command Instruction and Examples
1: Timer display On/Off
GALEDTM=ON
Description: Timer display enables
2: Timer Date On/Off
GALEDDT=OFF
Description: Date disable at timer display
3: Timer Date Setting
GALEDDATE=111025
Description: The timer's date will set to 2011, Oct 25
4: Timer Date Mode
GALEDDTMD=5
Description: If the timer is set to 2011, Oct. 25, then it will show 25-10-11 on the display
5: Timer Time Setting
Timer Time Setting=061025
Description: The timer's time will set to 6:10AM 25 seconds
6: Timer Month Language of Date
Description: If the timer set to 2011, Oct. 25 and Date mode set to DD-MMM-YY, then it will show 25-OCT-11 on
the display
7: Timer Display Mode
GALEDTMD=1
Description: If there are 3 messages, then it will show as follows: Message 1  timer display  Message 2 
timer display  Message 3  timer display  Message 1…(repeat)
GALEDTMD=2
Description: If there are 3 messages, then it will show as follows: Message 1  Message 2  Message 3  timer
display  Message 1…(repeat)
8: Timer Hour Type
GALEDTMHR=12
Description: The timer's hour type can be selected 12 hours. The default type is 24 hours
9: Timer Display Hold Time
GALEDSHTM=005
Description: The timer's time will show and hold 5 seconds