AGI Security SYS-4HNVR304 Quick Guide - Manual (Page 8)

CONNECTION
3
2. CONNECTION
2.1 Camera IP Configurations by LAN
Auto mode is to simplify the complicated network settings within three minutes. The connection mode of the LAN
port is “AUTO” by default. This mode is suitable when the LAN port of the device is connected to a hub.
Note: SETTING Path: ( ADVANCED CONFIG)  NETWORK  LAN  MODE.
Type 1
Monitor
which supports HD image display
Connect up to 4 IP devices:
Rear
Panel
LAN
High Definition
Display Interface
RJ45
network cable
RJ45
network cable
Alarm I/O+Magnetic Contact
ala
m
in
G
ro
un
d
Or
Magnetic Contact Alarm I/O
Please refer to the IP camera
user manual for connection
Power Switch
IP camera
Laptop
iPhone
iPad
Android Devices
......
Internet
Remote
Controller
DC48VAdapter
DC48V IN
LAN LAN LAN
eSATA port
Please install a HDD into this
recorder before connecting it to
IP cameras for video recording.
Disk Array
Note: For access this recorder remotely with your mobile device or laptop, you need to connect this
recorder to Internet. For details, please get the setup manual from the supplied CD or from
www.surveillance-download.com/user/network_setup/network_setup_recorder.pdf .