User interface 3.1 local, 1 device status, 2 channel status – AGI Security SYS-4HNVR304 Quick Guide User Manual
Page 12: 3 quick operation

USER INTERFACE
7
3. USER INTERFACE
3.1 Local
3.1.1 Device Status
Note: The functions shown may vary based on the model or the access user level you use.
Key lock
Key unlock
Channel lock
Channel unlock
USB flash drive / device connected
No USB device connected
Timer record on
Timer record off
Overwrite on
Overwrite off
Sequence mode on
Sequence mode off
PTZ mode on
PTZ mode off
Backup event queued and USB flash drive needed
USB flash drive full
CPU loading
Network Status:
(WAN) Internet connected
(WAN) Internet disconnected
(WAN) Local connection
(LAN) Auto mode –Mbit/s
(LAN) Auto mode – Gbit/s
(LAN) DHCP / Static IP mode
(LAN) Camera disconnected
3.1.2 Channel Status
Note: The functions shown may vary based on the model or the access user level you use.
Auto search on
Auto search off
Original size
Fit to screen
Live audio on
Audio off
Audio playback on
Audio playback off
Recording
PTZ control
Alarm event
Motion event
Live information
Playback information
Digital zoom
Channel Playback
Quick camera control
3.1.3 Quick Operation
Move to the arrow mark to extend the quick menu bar and show the four functions as follows:
Click to show the channel switch panel and select the channel you want.
Click to display the playback control panel, and click
to play the latest recorded video clip, or click
to enter the search
list.
Click to open the IP search window and check the current connection status of each channel.
Click to show the power off panel to either halt or reboot the system.