AGI Security GV-JOYSTICK - Manual (Page 9)

1. Insert the Software CD. It will run automatically and a window pops up.
Figure 3
2. Select
Install or Remove GV-Series Driver
, and then click Install Geovision USB
Devices Driver . This dialog box appears.
Figure 4
3. Click Install to install the driver. When the installation is complete, this message will
appear: Install done!
4. Click Exit to close the dialog box.
5. To verify that the driver is installed correctly, go to Windows Device Manager. In the Ports
(COM & LPT) field, you should see the entry for Prolific USB-to-Serial Bridge.
Figure 5
Note:
Remember the COM port showing in the Prolific USB-to Serial Bridge entry. It
indicates the port number that the GV-Joystick is using.
6